Delta ASDA-B3 Series, Руководство пользователя

Страница: 331 / 815

Parameters ASDA-B3
8-46
8
P1.038 Zero speed range
Address: 014CH
014DH
Operation
interface:
Panel / software Communication Control mode: All
Default: 10.0 100 Data size: 16-bit
Unit: 1 rpm 0.1 rpm -
-
Setting range: 0.0 - 200.0 0 - 2000 - -
Format: One decimal DEC - -
Example: 1.5 = 1.5 rpm 15 = 1.5 rpm -
-
Settings:
Sets the range for the zero-speed signal (ZSPD). When the forward or reverse speed of the motor is
slower than this value, the zero-speed signal is triggered and DO.ZSPD is on.
P1.039 Target speed detection level
Address: 014EH
014FH
Default: 3000 Control mode: All
Unit: rpm Setting range: 0 - 30000
Format: DEC Data size: 16-bit
Settings:
When the forward or reverse speed of the motor is faster than this value, the target speed signal is
triggered and DO.TSPD is on.
P1.040
First set of maximum rotation speed for analog Speed
command Address: 0150H
0151H
Default: 3000 Control mode: S / T
Unit: rpm Setting range: 0 - 50000
Format: DEC Data size: 32-bit
Settings:
Maximum rotation speed for analog Speed command:
Speed mode:
Speed control command =
Voltage input×Setting value
10
Set the rotation speed corresponding to 10V (maximum voltage) for the analog speed control
command. If the value is 2000 and the external voltage input is 5V, then the speed control command is
1000 rpm.
Speed control command =
5V×2000 rpm
10
= 1000 rpm
Torque mode:
Speed limit command =
Voltage input×Setting value
10
Set the rotation speed corresponding to 10V (maximum voltage) for the analog speed limit command.
If the value is 2000 and the external voltage input is 5V, then the speed limit command is 1000 rpm.
Speed limit command =
5V×2000 rpm
10
= 1000 rpm