Delta ASDA-B3 Series, Руководство пользователя

Страница: 269 / 815

Motion Control ASDA-B3
7-50
7
 Multiple commands
The PR queue updates commands every 1 ms. For a motion command, the PR queue sends
the next command to the generator only after the previous command completes. Jump or Write
commands are executed in the PR queue immediately. As shown in Figure 7.1.6.4, in the first
ms, the PR queue receives a Position command and sends this command to the motion
command generator, having the generator to execute the command. In the second ms, the PR
queue receives a Write command and executes it immediately. In the third ms, the PR queue
receives a Jump command and executes it immediately as well. These last two commands are
not sent to the motion command generator since the PR queue and the generator can execute
commands independently. In the fourth ms, the PR queue receives a Position command.
Next, the PR executor sends this Position command to the generator for execution.
PR#1
Position
DLY=[0] 0 ms
5000 PUU
ABS
200 rpm
PR#5
Position
DLY=[0] 0 ms
10000 PUU
ABS
500 rpm
PR
executor
Motion
command
generator
Time
Speed
PR#2
Write
DLY=[0] 0 ms
P5.045=100
PR#3
Jump
DLY=[0] 0 ms
PR#5
(1 ms Cmd cycle)
(1 ms Cmd cycle) (1 ms Cmd cycle)
(1 ms Cmd cycle)
Figure 7.1.6.4 Multiple sequence commands