Delta ASDA-B3 Series, Руководство пользователя

Страница: 298 / 815

ASDA-B3 Parameters
8-13
8
8.3 Parameter descriptions
P0.xxx Monitoring parameters
P0.000
★
Firmware version
Address: 0000H
0001H
Default: Factory setting Control mode: All
Unit: - Setting range: -
Format: DEC Data size: 16-bit
Settings:
Displays the firmware version of the servo drive.
P0.001■ Current drive alarm code (seven-segment display)
Address: 0002H
0003H
Default: - Control mode: All
Unit: - Setting range:
0x0000: alarm clear (same as
DI.ARST)
0x0001 - 0xFFFF: displays the
alarm code (not writable)
Format: HEX Data size: 16-bit
Settings:
For the list of alarms, refer to Section 12.1 Alarm list.
P0.002 Drive status
Address: 0004H
0005H
Default: 1 Control mode: All
Unit: - Setting range: -300 to 127
Format: DEC Data size: 16-bit
S
ettings:
The parameter setting displayed on the panel. Input the monitoring code to P0.002 to view changes to
the variable on the panel. For the list of monitoring variables, refer to Table 8.3 Monitoring variables
descriptions.
P0.003 Analog output monitoring
Address: 0006H
0007H
Default: 0x0000 Control mode: All
Unit: - Setting range: 0x0000 - 0x0077
Format: HEX Data size: 16-bit
Settings:
Y Z U
X
X MON2 value Z Reserved
Y MON1 value U Reserved