Delta ASDA-B3 Series, Руководство пользователя

Страница: 751 / 815

Specifications ASDA-B3
A-4
A
Item Specification
Protection function
Overcurrent, Overvoltage, Undervoltage, Overheat, Regeneration error,
Overload, Excessive speed deviation, Excessive position deviation,
Encoder error, Calibration error, Emergency stop, Forward / reverse
limit error, Serial communication error, RST leak phase, Serial
communication timeout, Short-circuit protection for terminals U, V,
and W.
Communication interface RS-485 / USB / CANopen / DMCNET / EtherCAT
En
vi
ro
n
m
en
t
Installation site
Indoors (avoid direct sunlight), no corrosive vapor (avoid fumes,
flammable gases, and dust)
Altitude Below 2,000 m above sea level
Atmospheric pressure 86 kPa - 106 kPa
Operating temperature
0˚C - 55˚C (32˚F - 131˚F) (If the operating temperature is above 45˚C
(113˚F), forced cooling is required)
Storage temperature -20˚C to +65˚C (14˚F to 176˚F)
Humidity Under 0 - 90% RH (non-condensing)
Vibrating 9.80665 m/s 2 (1 G), less than 20 Hz, 5.88 m/s 2 (0.6 G), 20 to 50 Hz
IP rating IP20
Power system TN system *3*4
Approvals
IEC/EN/UL/TUV *5 61800-5-1
Note:
1. Within the rated load, the speed ratio is: the minimum speed (smooth operation) / rated speed.
2. Within the rated speed, the speed calibration ratio is:
(rotational speed with no load - rotational speed with full load) / rated speed.
3. TN system: the neutral point of the power system connects directly to the ground. The exposed metal
components connect to the ground through the protective ground conductor.
4. Use a single-phase three-wire power system for the single-phase power model.
5. Only B3A series model is TUV certified.
6. CE Certificate:
https://downloadcenter.deltaww.com/downloadCenterCounter.aspx?DID=21744&DocPath=1&hl=zh-
TW