Delta ASDA-B3 Series, Руководство пользователя

Страница: 360 / 815

ASDA-B3 Parameters
8-75
8
P2.033 Reserved
P2.034 Speed command error warning
Address: 0244H
0245H
Default: 5000 Control mode: S / Sz
Unit: rpm Setting range: 1 - 30000
Format: DEC Data size: 16-bit
Settings:
In Speed mode, this parameter sets the acceptable difference between the command speed and the
feedback speed. If the difference is greater than this value, AL007 occurs.
P2.035 Excessive deviation of Position command warning
Address: 0246H
0247H
Default: 50331648 Control mode: PT / PR
Unit: pulse Setting range: 1 - 1677721600
Format: DEC Data size: 32-bit
Settings:
In Position mode, this parameter sets the condition of acceptable difference between the command
position and the feedback position. If the difference is greater than this value, AL009 occurs.
P2.036 DI9 functional planning
Address: 0248H
0249H
Default: 0x0100 Control mode: All
Unit: - Setting range:
0x0000 - 0x015F
(last two codes are DI codes)
Format: HEX Data size: 16-bit
Settings:
Refer to the description of P2.010. There is no physical pin for DI9 on all models. DI9 is a virtual digital
input which you can use when the number of physical DI points is insufficient and trigger through
commuicaiton. You can set this virtual DI for a normally closed contact if the DI has to switch on as soon
as power is applied, such as DI.SON.