Delta ASDA-B3 Series, Руководство пользователя

Страница: 304 / 815

ASDA-B3 Parameters
8-19
8
P0.032■ Mapping parameter #8
Address: 0040H
0041H
Default: - Control mode: All
Unit: - Setting range:
Determined by the corresponding
parameter P0.042
Format: HEX Data size: 32-bit
Settings:
This setting is the same as P0.025, except its mapping target is set in P0.042.
P0.033 -
P0.034
Reserved
P0.035 Target setting for mapping parameter P0.025
Address: 0046H
0047H
Default: - Control mode: All
Unit: - Setting range:
Determined by the communication
address of the parameter group
Format: HEX Data size: 32-bit
Settings:
The formats of the high-bit parameter (PH) and the low-bit parameter (PL) are:
High bit Low bit
BA C D YX Z U
BA Hexadecimal code for the parameter index YX Hexadecimal code for the parameter index
C Hexadecimal code for the parameter group Z Hexadecimal code for the parameter group
D N/A U N/A
Select the data block to access the parameter corresponding to register 1. The mapping value is 32 bits
and can map to two 16-bit parameters or one 32-bit parameter.
P0.035: (Mapping parameter: P0.035; Mapping content: P0.025)
Set the parameter to
be mapped for
P0.025 high bit
P0. 035
Set the parameter to
be mapped for
P0.025 low bit
Map the parameter
set in P0.035 high bit
P0. 025
Map the parameter
set in P0.035 high bit
1.
When PH
≠
PL, it indicates that the content of P0.025 includes two 16-bit parameters.
Example: Target: set P2.003 to 0 in the mapping parameter and set P2.005 to 100.
Setting: set the P0.035 high bit to 0203 (P2.003) and low bit to 0205 (P2.005).
Thus, P0.035 = 0x02030205.
P2.003 P2.005
P0.035