SMD4MAN.WRI 06-98
SMD 4.0
STEP MOTION DRIVE SYSTEM
TST 4.0
STEP MOTOR POWER FEED
DSD 4.0
DIGITAL SERVO SYSTEM
OPERATION AND INSTALLATION MANUAL
SECTION 1: SMD DRIVER CASE
SECTION 2: MS DRIVER CARD
FOR QUICK REFERENCE - REFER TO THE APPENDIX SECTIONS
Страница 1: ...4 0 STEP MOTION DRIVE SYSTEM TST 4 0 STEP MOTOR POWER FEED DSD 4 0 DIGITAL SERVO SYSTEM OPERATION AND INSTALLATION MANUAL SECTION 1 SMD DRIVER CASE SECTION 2 MS DRIVER CARD FOR QUICK REFERENCE REFER TO THE APPENDIX SECTIONS ...
Страница 2: ...the PARK signal in manual Current and Step Angle Setting To remove the lid bottom and access the amplifier card which is mounted to the lid 1 Remove the 10 each hex head screws 2 Carefully lift and fold lid to label side of box so as not to disturb the wiring harness 3 Adjust the blue pot located on the card edge to the desired output current as required pot is normally set to 4 0 amps Select the ...
