Delta Electronics AH500, Руководство пользователя

Страница: 348 / 547

C h a p t e r 5 A p p l i e d I n s t r u c t i o n s
5.12.7 Instructing a Servo Drive to Capture Values
1. Motion control function block
The motion control function block T_DMCCapSet is used to instruct the servo drive specified on
a DMCNET to capture values. The value of the Axis input pin indicates an axis number. The
value of the CAP_Number input pin is the number of values which will be captured. Users can
set a capture signal by means of the Contact input pin, and set the source of the values which
will be captured. The value of the TriggerTime input pin indicates a minimum time interval, and
the value of the CapValue output pin is the value which is captured.
2. Input pins/Output pins
Input pin
Name Function
Data
type
Setting value Time when a value is valid
Axis
Motion axis
number
WORD K1~K12
The value of the Axis input
pin is valid when there is a
transition in the Enable
input pin’s signal from low to
high.
Enable
The servo
drive is
instructed to
capture
values when
there is a
transition in
the Enable
input pin’s
signal from
low to high.
BOOL True/False -
Cap_Number
Number of
values
captured
WORD K1~K400
The value of the
Cap_Number input pin is
valid when there is a
transition in the Enable
input pin’s signal from low to
high.
Contact
Setting a
capture signal
BOOL True/False
The value of the Contact
input pin is valid when there
is a transition in the Enable
input pin’s signal from low to
high.
Source
Source of the
values
captured
WORD K0~K3 (*1)
The value of the Source
input pin is valid when there
is a transition in the Enable
input pin’s signal from low to
high.
5 - 2 3 3