Delta Electronics AH500, Руководство пользователя

Страница: 430 / 547

C h a p t e r 8 E l e c t r o n i c C a m
The CAM Chart-0 window is shown below.





Displacement: The relation between the master axis and the slave axis is described in terms of
displacement.

Velocity: The relation between the master axis and the slave axis is described in terms of speed.

Acceleration: The relation between the master axis and the slave axis is described in terms of
acceleration.

Data setting area:

Resolution : Users can set the number of data points required in the electronic cam chart.
The number of data points must be in the range of 10 to 2047.

Velocity : The maximum speed of the slave axis and the minimum speed of the slave axis
are shown in this section. They are calculated by the system according to the data
related to displacement. Users can change the maximum speed of the slave axis
and the minimum speed of the slave axis by themselves.

Acc : The maximum acceleration of the slave axis and the minimum acceleration of the
slave axis are shown in this section. They are calculated by the system according to
the data related to displacement. Users can change the maximum acceleration of the
slave axis and the minimum acceleration of the slave axis by themselves.

Data Setting
…
: The description of the relation between the master axis and the slave axis
in terms of displacement is shown in the Data Setting window. The
displacement resolution set in the data setting area will be brought into the
8 - 11