Delta Electronics AH500, Руководство пользователя

Страница: 509 / 547

A H 5 0 0 M o t i o n C o n t r o l M o d u l e M a n u a l
13.3 Reading and Executing G-codes
The regular storage path for NC files is under the root directory \AHMotion\Gcode\ of a memory card.
The files are named 100~199 with a sub-name of NC (regardless of capitalization). Format of the
files is the same as text files. Each folder contains up to 100 G code files ready for use.
The 100 files stand for motion subroutines Ox100~199 (subsequent to the built-in subroutines
Ox0~Ox99). The file name 100 refers to Ox100, the file name 101 refer to Ox101, and so forth. So
the file name 199 refers to Ox199. As shown in the figure below, when Ox100 is executed, the
AH500 series motion control module will first open and access the file \AHMotion\Gcode\1.NC
and
then proceed with code transfer and processing.
X0.0
M OV H8064 SR1052
M OV H1000
SR1030
13.4 Device Backup and Restoration
An AH500 series motion control module provides the use of a memory card as the external storage
space for device backup and restoration.
1 3 - 4