S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-50
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
BGP Messages
Error Message
BGP-3-BRIB_RDADD Format: [%s] Couldn't add rdinfo %s to BRIB
Explanation
BGP was unable to add a prefix to the BGP RIB. The BGP process may have run out
of memory.
Parameters: Address-family, RDinformation...
Recommended Action
If BGP ran out of memory, add memory to the router or change the network
configuration to decrease memory requirements. Clear any BGP peers that may have been shut down
automatically. If BGP has available memory, restart BGP.
Error Message
BGP-3-BRIBADD Format: [%s] Couldn't add dest to BRIB for %s/%d
Explanation
BGP was unable to add a prefix to the BGP RIB. The BGP process may have run out
of memory.
Parameters: Address-family, Prefix/masklength ...
Recommended Action
If BGP ran out of memory, add memory to the router or change the network
configuration to decrease memory requirements. Clear any BGP peers that may have been shut down
automatically. If BGP has available memory, restart BGP.
Error Message
BGP-3-BRIBDEL Format: [%s] Couldn't delete dest from BRIB for %s/%d
Explanation
An unexpected but recoverable event has occurred.
Parameters: Address-family, Prefix/masklength ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-3-CLISET Format: Unable to set %s inheritance for %s
Explanation
An internal software error occurred.
Parameters: Template type, Peer address ...
Recommended Action
Use the 'restart' command to restart the feature and clear this problem.
Error Message
BGP-3-COMADD Format: Error occurred in community addition, no action
taken
Explanation
An internal error has occurred when the system attempted to a community.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-3-COMLEN Format: Community sets exceeded maximum allowed limit
Explanation
An internal limit was reached when the system attempted to a community.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.