S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-675
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSMGR Messages
Error Message
SYSMGR-2-CFGWRITE_ABORTED: Configuration copy aborted.
Explanation
A configuration copy has failed.
Recommended Action
Verify the other syslog messages printed correct the problem, and try again.
Error Message
SYSMGR-2-CFGWRITE_ABORTED_DIR: Unable to open the configuration
directory. Aborting configuration copy.
Explanation
The destination location for the startup-config could not be found.
Recommended Action
If the problem persists, please use the vshboot command 'init system' to
initialize the configuration partition.
Error Message
SYSMGR-2-CFGWRITE_ABORTED_INIT: Unable to initialize the
configuration directory (error-id [hex]). Aborting configuration copy.
Explanation
An attempt to copy the running-config to startup-config has failed because the old data
could not be removed.
Recommended Action
If the problem persists, please use the vshboot command 'init system' to
initialize the configuration partition.
Error Message
SYSMGR-2-CFGWRITE_ABORTED_LABEL: Unable to label the new
configuration (error-id [hex]). Aborting configuration copy.
Explanation
An attempt to copy the running-config to startup-config has failed because the new
startup-config could not be stamped.
Recommended Action
If the problem persists, please use the vshboot command 'init system' to
initialize the configuration partition.
Error Message
SYSMGR-2-CFGWRITE_ABORTED_LOCK: Unable to lock the configuration
(error-id [hex]). Aborting configuration copy.
Explanation
An attempt to copy the running-config to startup-config has failed because the system
could not lock the required configuration items.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-CFGWRITE_ABORTED_LOG: Unable to open a log file for the new
configuration: [chars] (error-id [hex]). Aborting configuration copy.
Explanation
An attempt to copy the running-config to startup-config has failed because a log file
could not be created.
Recommended Action
If the problem persists, please use the vshboot command 'init system' to
initialize the configuration partition.
