S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-54
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
BGP Messages
Error Message
BGP-3-MTSSEND Format: MTS send() error to SAP %d, opcode %d: %s
Explanation
An unexpected but recoverable event has occurred.
Parameters: MTS SAP, MTS Opcode, Error ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-3-NBRERR Format: %s Peer error: %s
Explanation
An internal software error occurred.
Parameters: Peer address, Error ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-3-NEGWRITE Format: Negative nr of %d bytes left to write to peer %s
Explanation
An internal software error occurred.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-3-NEXTHOPADD Format: [%s] Couldn't add next-hop to RNHDB for
%s/%d, error %d
Explanation
The router was unable to store a BGP next hop in an internal database, because it ran
out of memory.
Parameters: Address-family, Prefix/masklength, Error ...
Recommended Action
If BGP ran out of memory, add memory to the router or change the network
configuration to decrease memory requirements. Clear any BGP peers that may have been shut down
automatically. If BGP has available memory, restart BGP.
Error Message
BGP-3-NEXTHOPDEL Format: [%s] Couldn't delete next-hop from RNHDB for
%s/%d, error %d
Explanation
An unexpected but recoverable event has occurred.
Parameters: Address-family, Prefix/masklength, Error ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-3-NOBUF Format: [%s] Unable to get buffer for %s msg to peer %s
Explanation
An internal software error occurred.
Parameters: Address-family, Msg Type, Peer address ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.