S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-119
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
DIAGCLIENT Messages
Error Message
DIAG_PORT_LB-3-VLAN_ERROR: [chars]([dec]) [chars] Error:[chars]
Explanation
Port Loopback test process failed to get Diagnostic VLAN information.
Recommended Action
No action is required.
Error Message
DIAG_PORT_LB-3-VQI_GET_FAIL: Failed to get the Diag VQi from XBM.
Error:[chars]
Explanation
The Rewrite Engine Loopback test has failed to get the Diag VQi from XBAR Mgr.
Recommended Action
No action is required.
Error Message
DIAG_PORT_LB-3-XBM_CFG_REQ_FAIL: Failed to conigure the XBAR mask
while running the RewriteEngineLoopback test. Error:[chars]. Module:[dec] could
have gone offline
Explanation
The Rewrite Engine Loopback test has failed to set the XBAR mask while running the
test. The target module could have gone offline.
Recommended Action
No action is required.
DIAG_PORT_LB-5
Error Message
DIAG_PORT_LB-5-DIAG_PORT_LB_DISABLED: DIAG_PORT_LB Disabled
Explanation
DIAG_PORT_LB service has been disabled.
Recommended Action
No action is required.
Error Message
DIAG_PORT_LB-5-DIAG_PORT_LB_ENABLED: DIAG_PORT_LB Enabled
Explanation
DIAG_PORT_LB Service nabled.
Recommended Action
No action is required.
DIAGCLIENT Messages
This section contains the DIAGCLIENT messages.
