S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-309
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ISAPI-SLOT# Messages
Error Message
IPV6-6-INTERFACE_EVENT: IP address [chars] [chars] on interface
[chars]
Explanation
The IP address [chars] has been successfully [chars] on the interface [chars].
Recommended Action
No action is required.
Error Message
IPv6-6-IPV6_STATS_ERROR Format: Failed to get hardware statistics for
interface %s, reason %s
Explanation
IPv6 could not get the requested statistics from the hardware.
Recommended Action
No action is required.
Error Message
IPV6-6-ROUTE_NOT_ACTIVE: The [chars] is not active
Explanation
The specified route is successfully configured but currently is not active.
Recommended Action
Check that the route is correct and the outgoing interface is operationally up.
Error Message
IPV6-6-STARTING: IP configuration Manager started
Explanation
The IP Configuration Manager service has successfully started.
Recommended Action
No action is required.
Error Message
IPv6-6-v6_REG_SEND_MSG Format: Suppress PIM6 Data Register for (%s,
%s) due to suppression-timer\n
Explanation
Suppress PIM6 Data Register due to suppression-timer.
Parameters: Source address, Group address ...
Recommended Action
No action is required.
ISAPI-SLOT# Messages
This section contains the ISAPI-SLOT# messages.
ISAPI-SLOT#-0
Error Message
ISAPI-SLOT#-0-INVISTA_EMERG: [chars]
Explanation
ISAPI-invista software messages.
Recommended Action
No action is required.
