S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-638
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SVC Messages
Error Message
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec]
SS_EID_VL_ER_MDISK_RESOURCE_RAN_OUT ) Too many Managed Disks were presented to the
cluster [chars]
Explanation
The configuration is not valid. Too many devices have been presented to the cluster or
node.
Recommended Action
1. Remove unwanted devices from the fibre-channel network fabric. 2. Start a
cluster discovery operation to find devices. 3. List all connected managed disks. Check that the
configuration is as expected. Mark the error you have just repaired as fixed.
Error Message
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec]
SS_EID_VL_ER_QUORUM_DISK_CREATION_FAILURE ) A suitable Managed Disk for use as a
Quorum Disk was not found [chars]
Explanation
No Mdisk is suitable for use as a quorum disk. When a cluster is created three disks are
automatically selected as quorum disks. A quorum disk is needed to enable a tie-break when some
cluster members are missing. To become a quorum disk: The Mdisk must be accessible by all nodes
in the cluster and the Mdisk must have free extents. This error code is produced when at least one
quorum disk is not accessible by all nodes in the cluster. A quorum disk might not be available
because of a fibre-channel network failure or because of a fibre-channel switch zoning problem.
Recommended Action
1. Resolve any known fibre-channel network problems. 2. Confirm that
Mdisks have been created and that those mdisks have free extents. 3. List the manage disks. If at
least one managed disk shows a mode of managed, mark the error you have just repaired as fixed.
4. If the customer is unable to make the appropriate changes, contact the Cisco Technical Assistance
Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec]
SS_EID_VL_ER_QUORUM_DISK_NOT_AVAILABLE ) Quorum Disk not available [chars]
Explanation
One or more quorum disks were not discovered by the node.
Recommended Action
1. Resolve any known fibre-channel network problems. 2. Check managed
disk status. If any managed disks are offline or excluded perform the disk controller problem
determination and repair procedures for the managed disks. 3. Start a cluster discovery operation. 4.
Check managed disk status. If all managed disks show a status of online, mark the error you have
just repaired as fixed.
Error Message
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_ERR_CFG_ALL_SSH_KEYS_REMOVED
) Attempt to delete SSH keys (no effect) [chars]
Explanation
'svctask rmallsshkeys' command has been invoked. This command has no effect in SAN
Volume Controller for Cisco MDS 9000, but is retained for compatibility.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
