S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-590
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SDV Messages
SCSI-TARGET-7
Error Message
SCSI-TARGET-7-SCSI_TARGET_DISCOVERED: SCSI-target discovered
VSAN:[dec] FCID:[hex] prlisparm:[hex]
Explanation
SCSI-target process discovered VSAN [dec] FCID [hex] prli service parameter [hex].
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
SDV Messages
This section contains the SDV messages.
SDV-2
Error Message
SDV-2-RANDNUM_FAIL: Random number generation failed
Explanation
Random number generation failed. Process has to exit due to FIPS compliance.
Recommended Action
No action is required.
SDV-3
Error Message
SDV-3-ACL_CACHE_ERROR: ACL CACHE ERR, Trying to prog with no interface
list
Explanation
A Null interface list was generated for a ACL entry.
Recommended Action
No action is required.
Error Message
SDV-3-ACL_ERROR: ACL API, [chars], failed with error [hex]
Explanation
SDV invoked ACL API and received the error code. [chars] describes the API and
0x[hex] specifies the error.
Recommended Action
No action is required.
Error Message
SDV-3-ALLOC_FAILED: Failed for type [dec] size [dec]
Explanation
The SDM process could not allocate heap memory. [dec] is the memory type and [dec]
is the size of memory.
Recommended Action
No action is required.
