S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-130
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
DOT1X Messages
Error Message
DOT1X-4-MULTIHOST_ON_PCM: Interface [chars] is a member of
portchannel, dot1x host mode will be multi-host and changing it to single-host
mode won't be supported
Explanation
Current Port is a member of port channel, so dot1x host mode has to be in multi-host
mode.
Recommended Action
To change host mode, ensure that port is not a member of port channel.
Error Message
DOT1X-4-STOPPED: Event [chars] ignored because the state machine is
stopped: [chars] [chars]
Explanation
An attempt was made to post an event to a state machine that has already been stopped.
Recommended Action
An internal error has occurred with the state machine. The traceback should
indicate the guilty party.
Error Message
DOT1X-4-TO_MULTIHOST: Interface [chars] is in trunk mode, dot1x host
mode will be multi-host and changing it to single-host mode won't be supported
Explanation
Current Port is in trunk mode, so dot1x host mode has to be in multi-host mode.
Recommended Action
To change host mode, ensure that port is not in trunk mode.
DOT1X-5
Error Message
DOT1X-5-DOT1X_DISABLED: dot1x Disabled
Explanation
Dot1x service has been disabled.
Recommended Action
No action is required.
Error Message
DOT1X-5-DOT1X_ENABLED: dot1x Enabled
Explanation
Dot1x service has been enabled.
Recommended Action
No action is required.
Error Message
DOT1X-5-INVALID_MAC: broadcast or multicast mac address) [chars] is
trying to authenticate.
Explanation
Authentication using 802.1x is not allowed for zero, broadcast, and multicast source
MAC addresses.
Recommended Action
Connect a Dot1x supported Host to the Dot1x enabled port.
