S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-169
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ETHPORT Messages
ETHPORT-3
Error Message
ETHPORT-3-IF_DOWN_CHANNEL_ERR_DISABLED: Interface [chars] is down
(Channel error disabled)
Explanation
This interface belongs to a port channel and the port channel is error disabled.
Recommended Action
Perform 'shut' and 'no shutdown' on the port channel interface that it belongs
to.
Error Message
ETHPORT-3-IF_DOWN_ERROR_DISABLED: Interface [chars] is down (Error
disabled. Reason:[chars])
Explanation
The system has detected that the interface has has detected an error during the
configuration.
Recommended Action
Collect more information about the failed interface using the command 'show
port internal all interface [char]'. In most cases, you can recover using a 'shutdown' followed a 'no
shutdown' on the interface or remove and reinsert the fiber optic cable.
Error Message
ETHPORT-3-IF_ERROR_VLANS_REMOVED: VLANs [chars] on Interface [chars]
are removed from suspended state.
Explanation
The VLANs on an interface are being removed from the suspended state.
Recommended Action
No action is required.
Error Message
ETHPORT-3-IF_ERROR_VLANS_SUSPENDED: VLANs [chars] on Interface
[chars] are being suspended. (Reason: [chars])
Explanation
The VLANs on an interface are being suspended due to some protocol action.
Recommended Action
No action is required.
Error Message
ETHPORT-3-IF_SFP_ALARM: Interface [chars], [chars]
Explanation
There was an alarm on the transceiver module.
Recommended Action
Enter the show interface transceiver details command to obtain more
information.
Error Message
ETHPORT-3-IF_SFP_ERROR: Interface [chars], [chars]
Explanation
There was an error on the transceiver module.
Recommended Action
Enter the show interface transceiver details command to obtain more
information.
