S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-772
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
URIB Messages
Error Message
URIB-3-SDWRAP_LIB_ERROR Format: %s %s
Explanation
A SDWrap library function returned an error.
Parameters: Function, SDWrap Error Code ...
Recommended Action
No action is required.
Error Message
URIB-3-SEND_FROM_ERROR Format: Send from URIB to client \%s\ failed:
%s
Explanation
URIB was unable to send a message to the shown client.
Parameters: Client, Error ...
Recommended Action
Use the 'restart' command to restart the feature and clear this problem.
Error Message
URIB-3-SEND_NOTIF_ERROR Format: Failed to send %s notification buffer
to client \%s\; retried %lu times
Explanation
URIB was unable to send a notification to a client.
Parameters: Type of Notify, Client, Retries ...
Recommended Action
Use the 'restart' command to restart the feature and clear this problem.
Error Message
URIB-3-SEND_TO_ERROR Format: Send to URIB failed: %s
Explanation
The calling process was unable to send a message to URIB.
Recommended Action
Use the 'restart' command to restart the feature and clear this problem.
Error Message
URIB-3-TABLE_CREATE_ERROR Format: Failed to create table info for VRF
%s for client \%s\
Explanation
URIB could not create its table data structure for the VRF being created. There may be
further errors that indicate the failure in more detail. The shown VRF should be reconfigured in the
system. i.e. in global configuration, 'no vrf context <vrf-name>'
Parameters: VRF, Client ...
Recommended Action
Requires operator to intervene.
Error Message
URIB-3-TABLE_STATE_ERROR Format: Table state %s for VRF %s for client
\%s\
Explanation
URIB received a request from a client for a given VRF, but the given VRF was in a state
where that request is not permitted
Parameters: State, VRF, Client ...
Recommended Action
Requires operator to intervene.
