S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-653
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SVC Messages
Error Message
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_FC_ER_COPY_COMPLETED )
Flash Copy Copied [chars]
Explanation
The Flash Copy mapping or consistency group has entered the IDLE_COPIED state.
The target disk now contains a complete copy and is no longer dependent on the source.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_FC_ER_PREPARE_COMPLETED
) Flash Copy Prepared [chars]
Explanation
The Flash Copy mapping or consistency group has entered the PREPARED state. It is
now possible to Start or Stop the mapping/group.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec]
SS_EID_IC_EV_CLUSTER_RECOVERY_COMPLETE ) Cluster recovery completed [chars]
Explanation
Cluster recovery has completed successfully.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_IC_EV_IOGRP_ONE_OK ) One
node in the IO group is not available [chars]
Explanation
Following node remove by the user, there is only one node left in the IO group.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec]
SS_EID_IC_EV_SECURE_DELETE_COMPLETE ) Virtual Disk format completed [chars]
Explanation
The formatting (writing all zeros) to new extents of the Virtual Disk has completed.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_COLDSTART ) Node
software started [chars]
Explanation
The node software has been started (cold start).
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.