S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-484
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PLATFORM Messages
Error Message
PLATFORM-2-PFM_MODULE_POWER_ON: Manual power-on of [chars] from
Command Line Interface
Explanation
User initiated a module power-on from the CLI.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
PLATFORM-2-PFM_MODULE_POWER_ON: Manual power-on of Module [dec] from
Command Line Interface
Explanation
User initiated a module power-on from the CLI.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
PLATFORM-2-PFM_MODULE_RESET: Manual restart of Module [dec] from
Command Line Interface
Explanation
User initiated a module reload from the CLI.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
PLATFORM-2-PFM_NETBOOT_DISABLE: Netboot for supervisor module in slot
[dec] is disabled due to incompatible platform
Explanation
Standby supervisor failed to power up.
Recommended Action
Try to replace the standby supervisor.
Error Message
PLATFORM-2-PFM_PWR_MGMT_EPLD_VER_MISMATCH: Module [dec] Pwr Mgmt Epld
(Version-[dec]) needs to be upgraded
Explanation
Using a wrong version of Epld version can result in unexplainable behavior.
Recommended Action
Upgrade Power Managment EPLD.
Error Message
PLATFORM-2-PFM_STDBY_POWERUP_FAIL: standby supervisor failed to
powerup
Explanation
Standby supervisor failed to power up.
Recommended Action
Try to replace the standby supervisor.
