![Cisco AP775A - Nexus Converged Network Switch 5010 Скачать руководство пользователя страница 715](http://html.mh-extra.com/html/cisco/ap775a-nexus-converged-network-switch-5010/ap775a-nexus-converged-network-switch-5010_reference_67336715.webp)
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-677
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSMGR Messages
Error Message
SYSMGR-2-CONVERT_ZIPPING_FAILED: Failed to zip the converted startup
configuration.
Explanation
This message indicates that conversion of the startup configuration failed when system
was trying to zip the converted configuration.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-CORE_SAVE_FAILED: [chars]: PID [dec] with message [chars].
Explanation
The system has detected an error.
Recommended Action
No action is required.
Error Message
SYSMGR-2-CREATE_DONEFILE_FAILED: Creating /var/run/sysmgr.initdone
failed with return value: ([dec]).
Explanation
The initialization of the system could not complete.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-DELETE_BINARY_STARTUP_FAILED: Deletion of binary startup
config failed during boot (error-id [hex]).
Explanation
This message indicates that the deletion of the binary startup configuration failed
during boot.
Recommended Action
If the problem persists, please use the vshboot command 'init system' to
initialize the configuration partition.
Error Message
SYSMGR-2-FORMAT_FAILURE_SUP_RESET: Failure to format a partition
successfully causing sup to reset.
Explanation
The partition used to store non-volatile pss files could not be formatted successfully.
The supervisor will be reset.
Recommended Action
If the problem persists, please contact customer support.
Error Message
SYSMGR-2-GSYNC_ABORT: Global sync aborted by signal.
Explanation
The initial synchronization of the services has been aborted. The synchronization will
be attempted again later.
Recommended Action
Use the command 'reload module <mod>' to reset the standby supervisor if you
want to try again.