![Cisco AP775A - Nexus Converged Network Switch 5010 Скачать руководство пользователя страница 798](http://html.mh-extra.com/html/cisco/ap775a-nexus-converged-network-switch-5010/ap775a-nexus-converged-network-switch-5010_reference_67336798.webp)
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-760
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
UDLD Messages
Error Message
UDLD-3-MSG_SEND_FAILURE: failed to send [chars] to sap [dec]: [chars]
Explanation
The system has failed to send a message.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
UDLD-3-UDLD_INTERNAL_ERROR: UDLD internal error: [chars]
Explanation
A software sanity check failed in the course of UDLD processing.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
UDLD-3-UDLD_INTERNAL_IF_ERROR: UDLD internal error, interface
[chars]: [chars]
Explanation
A software sanity check failed in the course of UDLD processing.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
UDLD-4
Error Message
UDLD-4-UDLD_GWRAP_COUNT: UDLD gwrap count is %lu, please log a 'show
tech udld' for detail info.
Explanation
UDLD gwrap count reached high level, show tech udld is needed to debug it.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
UDLD-4-UDLD_PORT_DISABLED: UDLD disabled interface [chars], [chars]
detected
Explanation
An interface was disabled because UDLD protocol detected the cause indicated on the
interface indicated. Cause is likely due to bad interface hardware or cable misconfiguration. User
should investigate.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
UDLD-4-UDLD_PORT_RESET: UDLD reset interface [chars]
Explanation
A port which had been disabled for UDLD has been reset.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.