S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-23
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
AM Messages
Error Message
AM-2-URIB_PIB Format: Unable to get pib for %s VRF from URIB
Explanation
An unrecoverable software error has occurred during the AM initialization.
Recommended Action
Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
AM-3
Error Message
AM-3-BAD_PARAMS Format: Called %s with address family %d, iod %d,
l3address %s
Explanation
An unexpected but recoverable error has occurred.
Recommended Action
No action is required.
Error Message
AM-3-DEL_PROT_ADJ Format: Unable to delete protocol adjacency for %s,
uuid %s
Explanation
An unexpected but recoverable error has occurred.
Recommended Action
No action is required.
Error Message
AM-3-MAC_REG_FAILED Format: Mac registration with L2FM failed for mac
%s, iod %s, phy iod: %s
Explanation
MAC registration with L2FM failed.
Recommended Action
No action is required.
Error Message
AM-3-MAX_RETRIES Format: Notification retry limit exceeded for %s
Explanation
Client is not replying to our notifications.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
AM-3-MQ_RECV Format: Message queue receive failed on %s queue: %s
Explanation
An unexpected but recoverable error has occurred.
Recommended Action
No action is required.
Error Message
AM-3-MQ_SEND Format: Failed to send %s to %s queue: %s
Explanation
An unexpected but recoverable error has occurred.
Recommended Action
No action is required.
