S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-124
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
DIAGMGR Messages
Error Message
DIAGMGR-4-FIXED_INTRVL_CHANGED: The users are not allowed to change
monitoring interval of Test <[chars]>
Explanation
The specified health monitoring test interval is not user-configurable and therefore
cannot be changed.
Recommended Action
No action is required.The specific health monitoring interval is not user-
configurable by design so nothing can be done to change the interval.
DIAGMGR-5
Error Message
DIAGMGR-5-BOOTUP_CONF: Diagnostic Bootup Level: <[chars]>
Explanation
Current Diagnostic BootUp Level being configure or changed.
Recommended Action
No action is required.
Error Message
DIAGMGR-5-CALLOC_FAILURE: Memory allocation failure
Explanation
Memory allocation in a call to malloc/calloc has failed.
Recommended Action
No action is required.
Error Message
DIAGMGR-5-CHANGE_ALWAYS_HM: Health Monitoring test <[chars]> in
Module <[dec]> is a must run and cannot be modified
Explanation
The specified health monitoring test must be run and cannot be disabled.
Recommended Action
No action is required.The specific health monitoring test cannot be disabled by
design. The system is working properly.
Error Message
DIAGMGR-5-HM_START: Health monitoring test <[chars]> for Module
<[dec]>
Explanation
Health Monitoring Test started.
Recommended Action
No action is required.
Error Message
DIAGMGR-5-HM_STOP: Disabling health monitoring test <[chars]> for
Module <[dec]>
Explanation
Health Monitoring Test has been stopped It can be enabled through the diagnostic
monitor..... command.
Recommended Action
No action is required.
