S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-15
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ACLTCAM Messages
ACLTCAM Messages
This section contains the ACLTCAM messages.
ACLTCAM-2
Error Message
ACLTCAM-2-ACL_TCAM_ADJ_EXHAUSTED: ACLTCAM failed to program route for
VSAN: [dec], SID: [chars] DID: [chars], error: [chars].
Explanation
The ACLTCAM process has experienced a failure while programming a route for
VSAN [dec] SID [chars] DID [chars] due to resource exhaustion. [chars] is the error code.
Recommended Action
No action is required.
Error Message
ACLTCAM-2-ACL_TCAM_ALMOST_FULL: TCAM close to FULL. [chars] TCAM
Usage ([dec]/[dec]) exceeded [dec]% fwd-eng: [dec], [chars]
Explanation
[chars] TCAM usage [dec]/[dec] exceeded [dec] percent on fwd-engine [dec], [chars].
Recommended Action
No action is required.
Error Message
ACLTCAM-2-ACL_TCAM_CONFIG_READ_FROM_DRIVER_FAILED: [chars] [dec],
Error: [hex].
Explanation
The system is unable to read the configuration from the forwarding engine ASIC driver.
[chars] [dec], Error: 0x[hex].
Recommended Action
No action is required.
Error Message
ACLTCAM-2-ACL_TCAM_CONFIG_WRITE_TO_DRIVER_FAILED: [chars] [dec],
Error: [hex].
Explanation
The system is unable to write the configuration to the forwarding engine ASIC driver.
[chars] [dec], Error: 0x[hex].
Recommended Action
No action is required.
Error Message
ACLTCAM-2-ACL_TCAM_INCONSISTENT_DATABASE: Database found
inconsistent.
Explanation
Database found inconsistent.
Recommended Action
No action is required.
