S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-155
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ETH-PORT-SEC Messages
EPP-5
Error Message
EPP-5-EPP_FAILURE: Interface [chars] EPP Failure
Explanation
Trunk protocol failed.
Recommended Action
'show epp internal event-history error' will indicate the errors encountered.
Error Message
EPP-5-EPP_LOOPBACK: Interface [chars] is looped back to the same
switch
Explanation
The interface is looped back to another interface on the same switch.
Recommended Action
Check the connectivity of this interface and ensure that it is connected to
another switch.
ETH-PORT-SEC Messages
This section contains the ETH-PORT-SEC messages.
ETH-PORT-SEC-2
Error Message
ETH-PORT-SEC-2-ETH_PORT_SEC_SECURITY_VIOLATION_ANOTHER_PORT: Host
[chars] bound to Port [chars] in Vlan [dec] is trying to access Port [chars] in
Vlan [dec]
Explanation
The port is in a violation state because a MAC address that was seen on one port has
been seen on another port too.
Recommended Action
No action is required.
Error Message
ETH-PORT-SEC-2-ETH_PORT_SEC_SECURITY_VIOLATION_MAX_MAC_VLAN: Port
[chars] moved to [chars] state as host [chars] is trying to access the port in
vlan [dec]
Explanation
The port is in a violation state due to an exceeding address count.
Recommended Action
No action is required.
