S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-287
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IPS Messages
Error Message
IPS-3-ISLB_ZONE_NO_ACTIVE_ZONESET: iSLB zonset activation returned
[hex] for VSAN [dec]
Explanation
ISLB zone set activation failed. No active zone set.
Recommended Action
Activate a zone set in the specified VSAN and retry.
IPS-4
Error Message
IPS-4-FCIP_FTA_CFG_MISMATCH: [chars]: Mismatch in FCIP Ficon Tape
Acceleration configuration with peer
Explanation
The FCIP Ficon Tape Acceleration configuration does not match with peer's
configuration.
Recommended Action
Fix the FCIP Ficon Tape Acceleration configuration to be consistent with the
peer.
Error Message
IPS-4-FCIP_FTA_VSAN_UPDATE_WARNING: FCIP FICON tape acceleration VSAN
update had an error ([chars]) on interface [chars] causing a flap of the interface
Explanation
The FCIP FICON tape acceleration VSAN configuration experienced an error when
disabling and enabling the VSAN over the FCIP tunnel. The FCIP tunnel was disabled and reenabled
as a result of this error to ensure data integrity.
Recommended Action
No action is required.
Error Message
IPS-4-FCIP_LICENSE_BIND_FAILED: Bind failed for [chars] due to
[chars] for license failure; configuration accepted but bind failed
Explanation
The FCIP configuration was accepted, but the FCIP interface did not bind to a physical
interface because the appropriate license was not available. If a license becomes available in the
future, this FCIP interface will bind to a physical interface automatically.
Recommended Action
Check the license state with show license usage and acquire the necessary
FCIP license.
IPS-5
Error Message
IPS-5-FCIP_BIND_FAILED: Bind failed for [chars] due to [chars] for
[chars]
Explanation
FCIP/ISCSI Interface bind to Ethernet port failed.
Recommended Action
No action is required.
