S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-640
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SVC Messages
Error Message
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_DATA_CORRUPT ) Node
data corrupted - node rejected from cluster [chars]
Explanation
Node data is readable but corrupted. The node has been rejected from the cluster.
Recommended Action
1. Re-install the code on the node. The node will have to be removed and
re-added back to the cluster. 2. Ensure that the software is at the latest level on the cluster. If not,
upgrade the cluster and if necessary repeat step 1 with the latest level of code. 3. If the error
continues, ask IBM Product Support for assistance. It may be necessary to replace the Caching
Services Module.
Error Message
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_DATA_UNREADABLE ) Node
data unreadable - node rejected from cluster [chars]
Explanation
Node data could not be read. The node has been rejected from the from cluster.
Recommended Action
1. Re-install the code on the node. The node will have to be removed and
re-added back to the cluster. 2. Ensure that the software is at the latest level on the cluster. If not,
upgrade the cluster and if necessary repeat step 1 with the latest level of code. 3. If the error
continues, ask IBM Product Support for assistance. It may be necessary to replace the Caching
Services Module.
Error Message
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_HDW_CONFIG ) Processor
not valid [chars]
Explanation
The node has detected unexpected differences in the processor vital data.
Recommended Action
Reload the node. If the problem persists, replace the Caching Services Module.
Error Message
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_MEM_SIZE ) Memory size
error [chars]
Explanation
The detected memory size does not match the expected memory size for the cluster.
Recommended Action
A memory module on the Cisco MDS 9000 Caching Services Module is
probably faulty. Reload the node. If the error persists, replace the Caching Services Module.
Error Message
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_MISSING_RES ) Unable
to form a cluster due to lack of cluster resources [chars]
Explanation
The node is unable to locate sufficient other nodes in the cluster and/or \ the quorum
disk controller needed in order to form a cluster.
Recommended Action
Check the status of the quorum disk controller and the other nodes in the
cluster. If the quorum disk has failed, perform the problem determination procedures for the disk \
controller. Otherwise perform problem determination on the missing nodes and network.
