S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-680
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSMGR Messages
Error Message
SYSMGR-2-INVALID_SYSMGRCONF: [chars]: invalid configuration file
[chars]: [chars] (error-id [hex]).
Explanation
The system image contains an inconsistent list of services. The initialization of the
system cannot proceed further.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-INVALID_VERSIONMSG: The remote System Manager ([chars])
declares itself in the same state as this System Manager ([chars]).
Explanation
The redundancy state negotiation between the two supervisors failed.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-ISSU_FAILED: The ISSU has failed: [chars] (error-id [hex])
Explanation
The ISSU has failed and the switch need to be rebooted.
Recommended Action
No action is required.
Error Message
SYSMGR-2-LAST_CORE_BASIC_TRACE: [chars]: PID [dec] with message
[chars].
Explanation
The system has detected an error.
Recommended Action
No action is required.
Error Message
SYSMGR-2-MSG_SEND_FAILURE_STANDBY_RESET: Failure in sending message
to standby causing standby to reset.
Explanation
The system is resetting the standby since mts on the active is unable to send a message
to standby.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-MTS_FLUSH_SYNC_QUEUE_FAILURE: flush mts sync queue failed
with [chars] (errno [dec])
Explanation
Calling mts_flush_sync_queue to guarante no outstanding messages. the failure might
affect HA.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
