S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-63
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
BGP Messages
Error Message
BGP-4-PFXWARN Format: [%s] Number of prefixes received from %s reached
%d, maximum %d
Explanation
The number of routes sent to us by a peer exceeded the threshold at which BGP should
generate a warning.
Parameters: Address-family, Peer, Warning limit, Max limit ...
Recommended Action
Check that the peer router is configured correctly. Clear the peer if necessary
after any change.
Error Message
BGP-4-SAMERID Format: Peer %s uses same routerid as us
Explanation
A BGP peer is using the same router ID as this router.
Recommended Action
Configure either the local or remote router with a different router ID.
Error Message
BGP-4-SLAB_HOLD Format: Not able to hold element from %s slab
Explanation
The system has detected an error.
Parameters: Memory slab name ...
Recommended Action
No action is required.
Error Message
BGP-4-SNMP_DEREGFAIL Format: Failed to deregister MIB with the SNMP
agent (%s).\n
Explanation
No user action is required.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-4-SNMP_REGFAIL Format: Failed to register MIB with the SNMP agent,
the BGP MIB will be unavailable. (%s)\n
Explanation
No user action is required.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
BGP-4-TXLIST Format: %s
Explanation
An unexpected but recoverable event has occurred.
Parameters: Error message related to txlist ...
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
