S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-648
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SVC Messages
Volume Controller to be repaired or deleted from the cluster. While the downgrade operation is in
progress, configuration commands sent to the cluster will fail with a message indicating that a
software upgrade operation is still in progress. The downgrade operation might take up to three
hours.
Recommended Action
1. Display the status of the nodes on the cluster. 2. If any node is offline, delete
the offline node from the cluster. If the delete fails with a message indicating that a software upgrade
is in progress, this means that the downgrade process is still active. Wait for this operation to either
complete or stop on the offline node and then retry the delete. If the downgrade operation had
stopped, it will now continue. 3. Solve all logged hardware problems 4. Ask the user to retry the
software install. 5. If the installation fails again, report the problem to your software support center.
6. Mark the error you have just repaired as fixed.
Error Message
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec]
SS_EID_IC_EV_UPGRADE_PCK_DELIVERY_FAILED ) Software install package cannot be
delivered to all nodes [chars]
Explanation
An error has occurred while sending the software package to the nodes.
Recommended Action
1. Display the status of the nodes on the cluster. 2. If any node is offline,
perform problem determination on the node and bring the node back online. Or, alternatively, delete
the offline node from the cluster. 3. Retry the software retry the delete. If the downgrade operation
had stopped, it will now continue. 3. Solve upgrade command. 4. If the installation fails again, report
the problem to your software support center.
Error Message
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_PLIC_LINK )
Connection to a configured remote cluster has been lost [chars]
Explanation
This cluster is no longer able to communicate with the remote copy partner cluster.
Recommended Action
Perform problem determination on the network and the other cluster.
Error Message
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_RC_ER_LSYNC ) Remote
Copy suffered loss of synchronization [chars]
Explanation
In a remote-copy operation, the relationship has stopped and lost synchronization, for
a reason other than a continuous I/O error.
Recommended Action
1. Correct higher priority errors, and and and then restart the remote copy. 2.
Mark the error you have just repaired as fixed.
Error Message
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_RC_ER_PERS ) Remote
Copy suffered persistent error [chars]
Explanation
A Remote Copy relationship has been stopped because of a continuous I/O error.
Recommended Action
1. Correct the higher priority errors, then retry the Remote Copy task. 2. Mark
the error you have just repaired as fixed.
