S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-128
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
DOT1X Messages
Error Message
DMM-SLOT#-5-LOG_EV_DMM_JOB_VERIFY_START: Job Id:%Ld NumSession:[dec]
Explanation
Event indicating the start of a Data Migration Job Verification.
Recommended Action
No action is required.
Error Message
DMM-SLOT#-5-LOG_EV_DMM_JOB_VERIFY_STOP: Job Id:%Ld NumSession:[dec]
Explanation
Event indicating the Suspension of Data Migration Job Verification by the user.
Recommended Action
No action is required.
DOT1X Messages
This section contains the DOT1X messages.
DOT1X-2
Error Message
DOT1X-2-DOT1X_INIT: Dot1x unable to start
Explanation
The system failed to create the Dot1x process.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
DOT1X-3
Error Message
DOT1X-3-ERR_SPANDST: It is configured as a SPAN Dest port.
Explanation
Dot1x and SPAN Dest ports are mutually exclusive features.
Recommended Action
Disable SPAN destination port configuration first before reconfiguring Dot1x
on the port.
Error Message
DOT1X-3-INVALID_INPUT: Invalid on interface [chars].
Explanation
The Dot1x interface parameter is out of the specified range or is invalid.
Recommended Action
Refer to the CLI help documentation to determine the valid 802.1x parameters.
Error Message
DOT1X-3-MEM_UNAVAIL: perform the 802.1X action.
Explanation
Insufficient system memory is available to perform the Dot1x Authentication.
Recommended Action
Reduce other system activity to ease memory demands. If conditions warrant,
upgrade to a larger memory configuration.
