S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-469
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM6 Messages
PIM6-6
Error Message
PIM6-6-IF_DEPEND Format: Removed interface (%s) has %s dependency
Explanation
There is residual configuration on the deleted interface.
Parameters: Interface name, Dependent Config Command ...
Recommended Action
No action is required.
Error Message
PIM6-6-MAX_GRANGES Format: Max Granges allowed to be configured for
use shared tree config is %d
Explanation
Exceeded the group range limit.
Recommended Action
No action is required.
Error Message
PIM6-6-MAX_RPS Format: Cannot store bidir-RP %s, a maximum of %d are
supported
Explanation
Due to hardware limitations, there is a maximum number of Bidir-PIM6 RPs that can
be stored.
Recommended Action
No action is required.
Error Message
PIM6-6-MQFLUSHED Format: Flushing %lu messages from %s mq
Explanation
Flushing old residual messages fom the message-queue.
Recommended Action
No action is required.
Error Message
PIM6-6-MQLOOP_UNKNOWN_MSG Format: Received unknown message %d/%d
Explanation
PIM6 process received unknown Interprocess message, dropped.
Recommended Action
No action is required.
Error Message
PIM6-6-NEGATIVE_PREFIX Format: Group prefix %s/%d from RP %s has
negative-bit set, ignore group entry
Explanation
The RP is advertising a group range to be in dense-mode. This implementation only
supports sparse-mode so the group entry will be igored.
Parameters: Type of malloc(size), Function Name ...
Recommended Action
No action is required.
