![Cisco AP775A - Nexus Converged Network Switch 5010 Скачать руководство пользователя страница 861](http://html.mh-extra.com/html/cisco/ap775a-nexus-converged-network-switch-5010/ap775a-nexus-converged-network-switch-5010_reference_67336861.webp)
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-823
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
XBAR Messages
XBAR-2
Error Message
XBAR-2-ARB_INIT_FAIL: Arbiter Initialization failed return_code [hex]
([chars]).
Explanation
The supervisor has experienced an arbiter setup failure .
Recommended Action
No action is required.
Error Message
XBAR-2-INCOMPATIBLE_CONFIG: [chars] [dec] [chars].
Explanation
This module is not compatible with the current fabric mode. It will be powered down.
Recommended Action
No action is required.
Error Message
XBAR-2-XBAR_INSUFFICIENT_XBAR_BANDWIDTH: Module in slot [dec] has
insufficient xbar-bandwidth.
Explanation
The system has detected insufficient xbar-bandwidth.
Recommended Action
No action is required.
Error Message
XBAR-2-XBAR_SUFFICIENT_XBAR_BANDWIDTH: Module in slot [dec] has
sufficient xbar-bandwidth.
Explanation
The system has detected recovery from insufficient xbar-bandwidth.
Recommended Action
No action is required.
XBAR-3
Error Message
XBAR-3-MEM_FULL: Memory allocation failed.
Explanation
The system has detected an error.
Recommended Action
No action is required.
Error Message
XBAR-3-MEM_FULL: Memory allocation failed. [chars] %i
Explanation
The system has detected an error.
Recommended Action
No action is required.