S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-243
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ICMPV6 Messages
Error Message
HSRP_ENGINE-6-STANDBYROUTERPRIORITYCHANGE: Interface [chars] [chars]
Grp [dec] Standby router priority changed to [dec]
Explanation
The priority of the Standby router for the group has changed.
Recommended Action
No action is required.
Error Message
HSRP_ENGINE-6-STATECHANGE: [chars] Grp [dec] state move to [chars]
Explanation
The router has changed its state.
Recommended Action
No action is required.
Error Message
HSRP_ENGINE-6-STATECHANGE2: [chars] Grp [dec] state moving from
[chars]
Explanation
The router has changed its state.
Recommended Action
No action is required.
Error Message
HSRP_ENGINE-6-TIMER: Interface [chars] [chars] Grp [dec] [chars]
timer changed to [dec] [chars]
Explanation
The hello/hold timer value for the HSRP group has changed.
Recommended Action
No action is required.
Error Message
HSRP_ENGINE-6-VIPLEARN: Interface [chars] [chars] Grp [dec] learnt
virtual ip address [chars]
Explanation
The local router has learned virtual ip address from the incoming HSRP packet.
Recommended Action
No action is required.
ICMPV6 Messages
This section contains the ICMPV6 messages.
ICMPV6-2
Error Message
ICMPv6-2-MALLOC_FAILED Format: malloc() failed for allocating %s in
%s()
Explanation
ICMPv6 process is out of heap memory. This could be due to temporary increase in the
number of static or dynamic Neighbor Cache Entries(NCEs) to a very high value.
Recommended Action
No action is required.
