S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-159
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ETH_PORT_CHANNEL Messages
ETH_PORT_CHANNEL-2
Error Message
ETH_PORT_CHANNEL-2-RESET_MODULE: reset module [dec] for not
responding or returning error
Explanation
A module is reset for not responding or returning error.
Recommended Action
No action is required.
ETH_PORT_CHANNEL-3
Error Message
ETH_PORT_CHANNEL-3-ALL_DROP_TIMEOUT: Some component(s) timed out on
dropping notif:[chars] (for:[chars]); Please collect <show system internal mts
buffers details>
Explanation
A component did not respond to a request in a stipulated time.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
ETH_PORT_CHANNEL-3-COMPAT_CHECK_FAILURE: [chars] is not compatible
Explanation
Compatibility check failed when adding ports to port channel.
Recommended Action
Make sure the compatibility parameters are consistent while adding ports to
port channel, or use force option.
Error Message
ETH_PORT_CHANNEL-3-GENERAL_ERROR: [chars]
Explanation
General error.
Recommended Action
No action is required.
Error Message
ETH_PORT_CHANNEL-3-LACP_ERROR: [chars] [chars]
Explanation
LACP error.
Recommended Action
No action is required.
Error Message
ETH_PORT_CHANNEL-3-MSG_SEND_FAILURE: failed to send [chars] to sap
[dec]: [chars]
Explanation
The system has failed to send a message.
Recommended Action
No action is required.
