S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-678
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSMGR Messages
Error Message
SYSMGR-2-GSYNC_FAILED_ACTIVE: global sync failed for UUID [hex]
Explanation
Gsynchronizationctrl on active has failed.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-GSYNC_FAILED_STDBY: standby fails due to gsync failure on
[chars]
Explanation
Standby fails/resets due to gsynchronization failure.
Recommended Action
Use the command 'reload module <mod>' to reset the standby supervisor if you
want to try again.
Error Message
SYSMGR-2-GSYNC_GET_TIMEOUT: Request for global sync for UUID [hex]
not completed in specified time.
Explanation
Service failed to complete global synchronizationin specified time. The standby will no
longer act as a HA standby.
Recommended Action
If the problem persists, please contact customer support.
Error Message
SYSMGR-2-GSYNC_READY_SRVFAILED: Service [chars] on standby supervisor
failed to restore its snapshot (error-id [hex]).
Explanation
The initial synchronization of service [chars] has failed.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-GSYNC_SNAPSHOT_SRVFAILED: Service [chars] on active
supervisor failed to store its snapshot (error-id [hex]).
Explanation
The initial synchronization of service [chars] has failed.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-HANDSHAKE_FAILED: Handshake with service [chars] in vdc
[dec] failed since send failed: [chars] (error-id [hex]).
Explanation
Handshake with a service failed since system manager could not send handshake
response to it.
Recommended Action
No action is required.
