S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-114
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
DIAG_PORT_LB Messages
DIAG_PORT_LB Messages
This section contains the DIAG_PORT_LB messages.
DIAG_PORT_LB-2
Error Message
DIAG_PORT_LB-2-GET_DIAG_BD_FAIL: [chars]([dec]) Failed to get the BD
for Diag VLAN:[dec]. Error:[chars].
Explanation
Failed to get the BD corresponding to the Diag VLAN.
Recommended Action
No action is required.
Error Message
DIAG_PORT_LB-2-LCM_RESP_SEND_FAILURE: LC Inserted request response
send to Module Manager failed . Error:[chars]
Explanation
The system has failed to send the response for LC insertion to Module Manager.
Recommended Action
No action is required.
Error Message
DIAG_PORT_LB-2-LIF_GET_ERROR: [chars]([dec]) [chars] Error:[chars]
Explanation
Port Loopback test process failed to get Diagnostic LIF id.
Recommended Action
No action is required.
Error Message
DIAG_PORT_LB-2-MALLOC_FAILURE: [chars]([dec]) Memory allocation
failed.
Explanation
Port Loopback test process could not allocate enough memory.
Recommended Action
No action is required.
Error Message
DIAG_PORT_LB-2-MTS_LIB_ERROR: [chars]([dec]) [chars]. Error:[chars]
Explanation
Port Loopback test process failed in MTS API.
Recommended Action
No action is required.
Error Message
DIAG_PORT_LB-2-PORTLOOPBACK_TEST_FAIL: Module:[dec]
Test:PortLoopback failed [dec] consecutive times. Faulty module:[chars] affected
ports:[chars] Error:[chars]
Explanation
The PortLoopback test has failed on the module consecutively.
Recommended Action
No action is required.
