S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-765
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
URIB Messages
Error Message
URIB-3-DEL_ERROR Format: Could not delete %s/%d from %s
Explanation
A error was encountered. The system may run into more errors because of this problem.
Recommended Action
Use the 'system switchover' command to switch over to the standby supervisor.
If no standby is present, or the standby is not ready, use the 'reload' command to reload the system.
The state of the standby can be checked using the 'show system redundancy ha status' command.
Error Message
URIB-3-EPID_MIS_MATCH_ERROR Format: \%s\ epid (%u) does not match
known epid (%u)
Explanation
The id a client provided does not match the id that URIB currently has stored for the
client. The client probably restarted ungracefully and URIB has the old id.
Parameters: Client, Expected epid, Received epid ...
Recommended Action
Use the 'restart' command to restart the feature and clear this problem.
Error Message
URIB-3-FILE_OPEN_ERROR Format: File open error: %s
Explanation
This message is for internal debugging only.
Recommended Action
No action is required.
Error Message
URIB-3-FILE_WRITE_ERROR Format: File write error: %s
Explanation
This message is for internal debugging only.
Recommended Action
No action is required.
Error Message
URIB-3-GENERAL_CRIB_ERROR Format: %s
Explanation
CRIB not in use.
Recommended Action
No action is required.
Error Message
URIB-3-GENERAL_PTHREAD_ERROR Format: Thread %d: %s
Explanation
The POSIX pthread library returned an error to URIB.
Parameters: Thread name, Thread operation ...
Recommended Action
Use the 'system switchover' command to switch over to the standby supervisor.
If no standby is present, or the standby is not ready, use the 'reload' command to reload the system.
The state of the standby can be checked using the 'show system redundancy ha status' command.
