S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-696
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSMGR Messages
Error Message
SYSMGR-2-VDC_DELETE_FAILURE: The vdc delete has failed: [chars]
(error-id [hex])
Explanation
The vdc delete has failed.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-VDC_NOT_CLEANEDUP_SRVS: vdc [dec]: [chars]
Explanation
The system has detected an error.
Recommended Action
No action is required.
Error Message
SYSMGR-2-VOLATILE_DB_FULL: System volatile database usage is
unexpectedly high at [dec]%.
Explanation
The system volatile database space is almost full.
Recommended Action
Please run the command 'system pss shrink'. If this message continues to
persist, please contact TAC.
Error Message
SYSMGR-2-WARMSWITCHOVER_START: This supervisor is becoming active.
Explanation
A cold switchover has started.
Recommended Action
When the other supervisor is back online, use the command 'show system
reset-reason' to know what caused the switchover.
Error Message
SYSMGR-2-WDT_KGDB: System watchdog kgdb has been [chars] for slot
[dec].
Explanation
The system watchdog kgdb has been [chars]. If the command has been enabled, the
system will go into kgdb if there is a watchdog timeout.
Recommended Action
No action is required.
SYSMGR-3
Error Message
SYSMGR-3-BASIC_TRACE: [chars]: PID [dec] with message [chars].
Explanation
The system has detected an error.
Recommended Action
No action is required.
