S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-521
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PORT-CHANNEL Messages
Error Message
PORT-CHANNEL-1-MALLOC_FAILED: cannot allocate memory (size [dec])
Explanation
Not enough memory.
Recommended Action
No action is required.
Error Message
PORT-CHANNEL-1-MAP_PARAM_FAILURE: mapping parameter failed for
[chars] [[chars]]
Explanation
Parameter mapping failed.
Recommended Action
Specified service has failed; check its status.
Error Message
PORT-CHANNEL-1-MCAST_SEND_FAILURE: failed to send multicast [chars]:
[chars]
Explanation
The system has failed to send a multicast message to all modules, usually because some
module went down.
Recommended Action
Run show port channel consistency to check consistency.
PORT-CHANNEL-2
Error Message
PORT-CHANNEL-2-AUTO_CREATE_DISABLED: [chars] has been deprecated;
[chars] [chars]
Explanation
Auto create port channel is deprecated and disabled.
Recommended Action
Convert the auto created channel to persistent by doing port channel <n>
persistent.
Error Message
PORT-CHANNEL-2-RESET_MODULE: reset module [dec] for not responding or
returning error
Explanation
A module is reset for not responding or returning error.
Recommended Action
No action is required.
PORT-CHANNEL-3
Error Message
PORT-CHANNEL-3-COMPAT_CHECK_FAILURE: [chars] is not compatible
Explanation
Compatibility check failed when adding ports to port channel.
Recommended Action
Make sure the compatibility parameters are consistent while adding ports to
port channel, or use force option.
