S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-73
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
CDP Messages
CALLHOME-6
Error Message
CALLHOME-6-NONCRIT_EVENT: [chars]
Explanation
A noncritical Call Home event [chars] occurred.
Recommended Action
If you have configured your e-mail address to receive Call Home notifications,
check your e-mail for more details about this Call Home event. If Call Home was not enabled,
execute commands relevant to the callhome event to get more information about the error.
CDP Messages
This section contains the CDP messages.
CDP-2
Error Message
CDP-2-INITFAIL: CDP Daemon Initialization failed: [chars]
Explanation
CDP daemon initialization has failed. [chars] explains the reason for the failure.
Recommended Action
No action is required.
CDP-3
Error Message
CDP-3-ALLOCFAIL: Heap Memory allocation failed: [chars]
Explanation
The CDP daemon is out of dynamic memory. [chars] specifies the context where the
failure occurred.
Recommended Action
No action is required.
Error Message
CDP-3-GENERROR: [chars]
Explanation
The CDP daemon encountered a generalerror thatdoes not fall in any of the above
categories. [chars] describes the error and its context.
Recommended Action
No action is required.
Error Message
CDP-3-MCASTBINDFAIL: Failed to bind for CDP multicast address on
interface [hex] - [chars]
Explanation
An attempt to register for packets destined to the CDP multicast address failed. [dec]
identifies the interface and [char] identifies the reason.
Recommended Action
No action is required.
