Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 92 / 266

72
Escala BL460 - Problem Determination and Service Guide
2.4.2.1 C1001F00 to C1645300 Service processor checkpoints
The C1xx progress codes, or checkpoints, offer information about the initialization of both
the service processor and the server. Service processor checkpoints are typical reference
codes that occur during the initial program load (IPL) of the server.
Table 15 lists the progress codes that might be displayed during the power-on self-test
(POST), along with suggested actions to take if the system hangs on the progress code.
Only when you experience a hang condition should you take any of the actions described
for a progress code.
In the following progress codes, x can be any number or letter.
Table 2-15.
C1001F00 to C1645300 checkpoints
• If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved. If an action solves the problem, you can stop performing
there maining actions.
• See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
C10010xx Pre-standby
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1001F00
Pre-standby: starting initial transition
file
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “Replacing the Tier 2 system-
board and chassis assembly”on page 258.
C1001F0D
Pre-standby: discovery completed in
initial transition file
While the blade server displays this
checkpoint, the service processor reads
the system vital product data (VPD). The
service processor must complete reading
the system VPD before the system
displays the next progress code.
1. Wait at least 15 minutes for this checkpoint to
change before you decide that the system is
hung.
Reading the system VPD might take as long as
15 minutes on systems with maximum
configurations or many disk drives.
2. Go to “ Checkout procedure ” on page 148 .
3. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1001F0F
Pre-standby: waiting for standby
synchronization from initial transition file
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1001FFF
Pre-standby: completed initial transition
file
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x01
Hardware object manager: (HOM):
the cancontinue flag is being cleared
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .
C1009x02
Hardware object manager: (HOM):
erase HOM IPL step in progress
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “ Replacing the Tier 2 system-
board and chassis assembly ” on page 229 .