Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 68 / 266

48
Escala BL460 - Problem Determination and Service Guide
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA010004 Bootp failed
Perform the following actions that checkpoint
CA00E174 describes:
1. Verify that:
−
The bootp server is correctly configured;
then, retry the operation.
−
The network connections are correct;
then, retry the operation.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board
and chassis assembly
” on page 229 .
BA010005 File transmission (TFTP) failed
Perform the following actions that checkpoint
CA00E174 describes:
1. Verify that:
−
The bootp server is correctly configured;
then, retry the operation.
−
The network connections are correct;
then, retry the operation.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board
and chassis assembly
” on page 229 .
BA010006 The boot image is too large Start up from another device with a bootable image.
BA010007
The device does not have the required
device_type property.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board
and chassis assembly
” on page 229 .
BA010008
The device_type property for this device
is not supported by the iSCSI initiator
configuration specification.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board
and chassis assembly
” on page 229 .
BA010009
The arguments specified for the ping
function are invalid.
The embedded host Ethernet adapters (HEAs) help provide
iSCSI, which is supported by iSCSI software device drivers
on either AIX or Linux. Verify that all of the iSCSI
configuration arguments on the operating system comply
with the configuration for the iSCSI Host Bus Adapter (HBA),
which is the iSCSI initiator .
BA01000A
The itname parameter string exceeds the
maximum length allowed.
The embedded host Ethernet adapters (HEAs) help provide
iSCSI, which is supported by iSCSI software device drivers
on either AIX or Linux. Verify that all of the iSCSI
configuration arguments on the operating system comply
with the configuration for the iSCSI Host Bus Adapter (HBA),
which is the iSCSI initiator .