Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 151 / 266

Chapter 2. Diagnostics
131
SRN Description FRU/action
A05-14x
System shutdown due to power fault with an
unspecified cause.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A05-19x System shutdown due to Fan failure.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A05-21x
System shutdown due to Over temperature
condition.
1. Make sure that:
a. The room ambient temperature is within the
system operating environment.
b. There is unrestricted air flow around the system.
c. All system covers are closed.
d. There are no fan failures
2. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
3. If no entry is found, replace the system-board and
chassis assembly.
A05-22x
System shutdown due to over temperature
and fan failure.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A05-24x
Power Fault specifically due to internal
battery failure.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A0D-00x
Error log analysis indicates an error detected
by the Service Processor, but the failure could
not be isolated.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A0D-06x
Service Processor reports unknown
communication error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A0D-07x
Internal service processor firmware error or
incorrect version.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A0D-08x
Other internal Service Processor hardware
error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A0D-09x
Service Processor error accessing Vital
Product Data EEPROM.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A0D-18x Service Processor detected NVRAM error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.