Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 190 / 266

170
Escala BL460 - Problem Determination and Service Guide
•
Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which components are
FRUs.
• If an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained
service technician.
Isolation
Procedure Code
Symptom Action
ANYPROC
Symbolic CRU
The failing component
is one of the system
processors.
Replace the system board and chassis assembly, as described in
“
Replacing the Tier 2 system-board and chassis assembly
” on page
229 .
BCPROB Symbolic
CRU
Error code 1xxx2670
indicates that the
Blade encountered a
problem, and the
blade server was
automatically shut
down as a result.
1. Check the management-module event log for entries that were made
around the time that the Escala BL460 blade server shut down.
2. Resolve any problems.
3. Remove the blade from the Bull Blade Chassis - Enterprise and then
reinsert the blade server.
4. Power on the blade server.
5. Monitor the blade server operation to verify that the problem is solved.
6. If the Chassis is functioning normally, but the 1xxx2670 problem
persists, Replace the system board and chassis assembly, as described in
“
Replacing the Tier 2 system-board and chassis assembly
” on
page 229 .
CAPACTY
Symbolic CRU
The failing component
is the management
card.
1. Replace the management card, as described in “ Removing the
management card ” on page 216 and “ Installing the management card ”
on page 217 .
2. After replacing the card and installing the blade server in the chassis unit
and before rebooting the blade server or performing other operations,
ensure that the initialization of the management card VPD occurs by
waiting for the management module to discover the blade server.
Otherwise, the system might fail to IPL.
CLCKMOD
Symbolic CRU
The logic oscillator is
failing.
Replace the system board and chassis assembly, as described in
“
Replacing the Tier 2 system-board and chassis assembly
” on page
229 .
DTRCARD
Symbolic CRU
Error code 1xxx2625,
2626, or 2527
indicates that the
blade server is
reporting a problem
with the PCIe
expansion card.
1. Reseat the PCIe expansion card.
2. If the problem persists, replace the expansion card.
3. If the problem persists, go to “
Checkout procedure
”, on page 148 .
4. If the problem persists, Replace the system board and chassis assembly,
as described in “
Replacing the Tier 2 system-board and chassis
assembly
” on page 229 .