Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 138 / 266

118
Escala BL460 - Problem Determination and Service Guide
SRN FFC
Description and Action
887-121 B08 Ethernet transceiver test failed. Go to “ Performing the checkout procedure ” on page 149 .
887-122 B09
Ethernet 10 base-2 transceiver test failed. Go to “ Performing the checkout procedure ” on
page 149 .
887-123 887 Internal loopback test failed. Go to “ Performing the checkout procedure ” on page 149 .
887-124 887
Software error log indicates a hardware problem. Go to “ Performing the checkout
procedure ” on page 149 .
887-125 887 Fuse test failed. Go to “ Performing the checkout procedure ” on page 149 .
887-202 887 Vital Product Data test failed. Go to “ Performing the checkout procedure ” on page 149 .
887-203 887 Vital Product Data test failed. Go to “ Performing the checkout procedure ” on page 149 .
887-209 887 RJ-45 converter test failed. Go to “ Performing the checkout procedure ” on page 149 .
887-304 887 Coprocessor internal test failed. Go to “ Performing the checkout procedure ” on page 149 .
887-305 887 Internal loopback test failed. Go to “ Performing the checkout procedure ” on page 149 .
887-306 887 Internal loopback test failed. Go to “ Performing the checkout procedure ” on page 149 .
887-307 887 External loopback test failed. Go to “ Performing the checkout procedure ” on page 149 .
887-319 887
Software device driver indicates a hardware failure. Go to “ Performing the checkout
procedure ” on page 149 .
887-400 887 Fuse test failed. Go to “ Performing the checkout procedure ” on page 149 .
887-401 887
Circuit breaker for Ethernet test failed. Go to “ Performing the checkout procedure ” on page
149 .
887-402 887
Ethernet 10 Base-2 transceiver test failed. Go to “ Performing the checkout procedure ” on
page 149 .
887-403 887
Ethernet 10 Base-T transceiver test failed. Go to “ Performing the checkout procedure ” on
page 149 .
887-405 887
Ethernet- network Rerun diagnostics in advanced mode for accurate problem determination.
Go to “ Performing the checkout procedure ” on page 149 .
950-2506 2506 221
Missing options resolution for 3Gb SAS Adapter card.
Try each of the following steps. After reseating, removing, or replacing a part, retry the
operation.
1. Check the management-module event log. If an error was recorded by the system, see
“ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Reseat the 3Gb SAS Adapter card.
4. Replace the 3Gb SAS Adapter card.
3. Replace the system-board and chassis assembly
2506-102E 722
Out of alternate disk storage for storage. Go to “ Performing the checkout procedure ” on
page 149 .
2506-3002 722
Addressed device failed to respond to selection. Go to “ Performing the checkout
procedure ” on page 149 .
2506-3010 722
Disk returned wrong response to adapter. Go to “ Performing the checkout procedure ” on
page 149 .
2506-3020 -
Storage subsystem configuration error. Go to “ Performing the checkout procedure ” on
page 149 .
2506-3100 -
Controller detected device bus interface error. Go to “ Performing the checkout procedure ”
on page 149 .
2506-3109 -
Controller timed out a device command. Go to “ Performing the checkout procedure ” on
page 149 .
2506-3110 - Device bus interface error. Go to “ Performing the checkout procedure ” on page 149 .
2506-4010 -
Configuration error, incorrect connection between cascaded enclosures. Go to “ Performing
the checkout procedure ” on page 149 .
2506-4020 -
Configuration error, connections exceed IOA design limits. Go to “ Performing the checkout
procedure ” on page 149 .