Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 67 / 266

Chapter 2. Diagnostics
47
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA00E843
Failure when initializing the interface to
AIX or Linux
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board and
chassis assembly
” on page 229 .
BA00E850
Failure when initializing dynamic
reconfiguration
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board and
chassis assembly
” on page 229 .
BA00E860 Failure when initializing sensors
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board and
chassis assembly
” on page 229 .
BA010000
There is insufficient information to boot
the systems
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board and
chassis assembly
” on page 229 .
BA010001
The client IP address is already in use by
another network device
Verify that all of the IP addresses on the network are unique;
then, retry the operation.
BA010002 Cannot get gateway IP address
Perform the following actions that checkpoint CA00E174
describes:
1. Verify that:
−
The bootp server is correctly configured;
then, retry the operation.
−
The network connections are correct;
then, retry the operation.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board
and chassis assembly
” on page 229 .
BA010003 Cannot get server hardware address
Perform the following actions that checkpoint
CA00E174 describes:
1. Verify that:
−
The bootp server is correctly configured;
then, retry the operation.
−
The network connections are correct;
then, retry the operation.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board
and chassis assembly
” on page 229 .